How to Make Magic cube Puzzle for your promos gifts

The manufacture of the first cube puzzle prototyp

es was by hand. During the late 1970s, methods for mass production were developed and continue to be used today. Typically, production is a step by step process that involves injection molding of the pieces, fitting the pieces together, decorating the cube puzzle, and putting the finished product in packaging.

Molding of cube puzzle

When production is initiated, the plastic pellets are transformed into cube puzzle parts through injection molding. In this process, the pellets are put into the hopper of an injection molding machine. They are melted when they are passed through a hydraulically controlled screw. As the screw turns, the melted plastic is shuttled through a nozzle and physically forced, or injected, into the mold. Just prior to the arrival of the molten plastic, the two halves of the mold are brought together to create a cavity that has the identical shape of the Cube puzzle part. This could be an edge, a corner, or the center piece. Inside the mold, the plastic is held under pressure for a specific amount of time and then allowed to cool. While cooling, the plastic hardens inside the mold. After enough time passes, the mold halves are opened and the cube pieces are ejected. The mold then closes again and the process begins again. Each time the machine moulds a set of parts is one cycle of the machine. The Cube puzzle cycle time is around 20 seconds.

After the cube parts are ejected from the mold, they are dropped into container bins and hand inspected to ensure that no significantly damaged parts are used. The waste sprue material is set aside to be reused or scrapped. Waste material can be ground up and melted again to make new parts, however reground material can degrade and cause poor quality parts. Cube puzzles are always made from virgin material and never use reground waste plastic.

Parts assembly of cube puzzle

The Cube puzzle parts are taken to an assembly line. In this phase of production, the individual cube pieces are put together. Starting with the nylon core, each ABS center cube is riveted to the core with a spring spacer. The rivet is carefully controlled with a depth stop to ensure the spring is compressed just the right amount. Each center cube has a plastic cover that is glued on to hide the rivet. One of the six center cubes is left until the last part of the assembly. The ABS edges and corner pieces are individually stacked around the core. The cube is built from the bottom up and the last piece to be assembled is the final center cube which is again riveted into the core with a spring spacer and the final cap is glued on.

Labeling of cube puzzle

Next, the Cube puzzle faces need to be labeled. The labels are made from sheet polypropylene material that is printed with the colors. The printed sheet PP is then laminated with a clear PP protective covering. The material is then die cut with the labels wound onto rolls. The labels are made with all nine squares of each face exactly aligned. This way the labels can be perfectly aligned when they are applied to the cube.

Packaging of cube puzzle

After all the labeling is completed, the cubes are put in their final packaging. This can be a small box that has an instruction booklet included or a plastic blister pack with a cardboard backing. The package serves the dual purpose of protecting the Cube puzzle from damage caused by shipping and advertising the product. The Cube puzzle packages are put into cases and moved to a pallet. The pallets are then loaded on trucks and the products are shipped all over the world.

Quality Control of cube puzzle

New products: Advertising diversified rectangle cube * Advertising magic credit card cube supplier * Advertising triangle foldable cube * Customized cuboid card cube * Customized diversified square cube * Promo foldable cylinder cube * Promotional diversified diamond folding cube * Promotional folding cube * Special size advertising magic cube* Two layers personalized cube

To ensure that each toy will be a high quality product, quality control inspectors check the product at each phase of production. The incoming plastic pellets are chemically tested to determine whether they meet certain chemical specifications. These include checks on appearance, color, melting point, toxicity, and molecular weight.
The quality of the individual parts are also inspected just after exiting the mold. Since thousands of parts are made daily, a complete inspection would be difficult. Consequently, line inspectors may randomly check the plastic parts at fixed time intervals and check to ensure they meet size, shape, and consistency specifications. This sampling method provides a good indication of the quality of the overall Cube puzzle production run. Things that are looked for include deformed parts, improperly fitted parts and inappropriate labeling. While visual inspection is the primary test method employed, more rigorous measurements may also be performed. Measuring equipment is used to check the length, width, and thickness of each part. Typically, devices such as a vernier caliper, a micrometer, or a microscope are used. Just prior to putting a cube in the packaging it may be twisted to ensure that it holds together and is in proper working order. This can be done by hand or by a turning machine. If a toy is found to be defective it is placed aside to be reworked later.